Aruba 2930F 24G PoE+ 4SFP Switch (JL261A)

Aruba 2930F 24G PoE+ 4SFP Switch (JL261A)

    Fiyat Teklifi Alın

    SPECIFICATIONS
    Aruba 2930F 24G PoE+ 4SFP Switch (JL261A) (JL261ACM1)
    I/O ports and slots
      24 RJ-45 autosensing 10/100/1000

    PoE+ ports (IEEE 802.3 Type

    10BASE-T, IEEE 802.3u Type

    100BASE-TX, IEEE 802.3ab Type

    1000BASE-T, IEEE 802.3at PoE+);

    Duplex: 10BASE-T/100BASE-TX: half

    or full; 1000BASE-T: full only

    4 SFP

    Additional ports and slots
      1 dual-personality (RJ-45 or USB

    micro-B) serial console port

    Physical characteristics
    Dimensions 17.42 (w) x 11.98 (d) x 1.73 (h) in

    (44.25 x 30.42 x 4.39 cm)

    (1U height)

    Weight 8.6 lb (3.9 kg)
    Memory and processor
      Dual Core ARM Cortex A9 @ 1016

    MHz, 1 GB DDR3 SDRAM;

    Packet buffer size: 12.38 MB

    4.5MB Ingress/7.785 Egress,

    4 GB eMMC

    Performance
      IPv6 Ready Certified
    1,000 Mb Latency < 3.8 μs (64-byte packets)
    10 Gbps Latency  
    Throughput up to 41.7 Mpps
    Switching capacity 56 Gbps
    Routing table size 2,000 IPv4, 1,000 IPv6 in hardware,

    200 OSPF, 256 Static, 10,000 RIP

    MAC address table size 32,768 entries
    Environment  
    Operating temperature 32°F to 113°F (0°C to 45°C);

    up to 5,000 Feet,

    0°C to 40°C (32°F to 104°F)

    up to 10,000 Feet

    Operating relative humidity 15% to 95% @ 104°F (40°C),
    noncondensing
    Non-operating/Storage

    temperature

    -40°F to 158°F (-40°C to 70°C);

    up to 15,000 Feet

    Non-operating/Storage

    relative humidity

    15% to 95% @ 149°F (65°C),
    Acoustic Power: 54.1 dB, Pressure: 40.6 dB
    Airflow direction Side-to-side
    Electrical characteristics
    Frequency 50/60 Hz
    Power efficiency
    certifications
    80plus.org certification: Silver
    Maximum heat dissipation 258.0 BTU/hr (272.2 kj/hr)
    Voltage 100 - 127 / 200 - 240 VAC, rated
    Current 4.9/2.4 A
    Maximum power rating 445 W
    Idle power 36.8 W
    PoE power 370 W PoE+
    Notes Idle power is the actual power
    consumption of the device with no
    ports connected. Maximum power
    rating and maximum heat dissipation are the worst-case theoretical
    maximum numbers provided for
    planning the infrastructure with
    fully loaded PoE (if equipped), 100%
    traffic, all ports plugged in, and all
    modules populated.
    Safety
      UL 60950-1: 2nd Edition;
    UL 62368-1: 2nd Edition;
    EN 60950-1:2006 +A11:2009
    +A1:2010 +A12:2011+A2:2013;
    EN 62368-1: 2nd Edition; IEC 60950-
    1:2005 +A1:2009 +A2:2013; CSA
    22.2
    No. 60950-1-07 2nd; IEC-62368-1:2nd Edition; EN 60825-1:2014 / IEC
    60825-1:2014 Class 1
    Emissions
      EN 55032:2012/CISPR 32 Class A;
    FCC CFR 47 Part 15 Class A; VCCI
    Class A; ICES-003 Class A;
    CNS 13438
    Immunity
    Generic EN 55024:2010/CISPR 24
    ESD IEC 61000-4-2
    Radiated IEC 61000-4-3
    EFT/Burst IEC 61000-4-4
    Surge IEC 61000-4-5
    Conducted IEC 61000-4-6
    Power frequency
    magnetic field
    IEC 61000-4-8
    Voltage dips and
    Interruptions
    IEC 61000-4-11
    Harmonics IEC/EN 61000-3-2
    Flicker IEC/EN 61000-3-3
    Management
      Aruba Central; Aruba AirWave
    Network Management; IMC –
    Intelligent Management Center;
    Command-line interface; Web
    browser; Configuration menu;
    SNMP manager; Telnet; RMON1;
    FTP