Aruba 2930M 40G 8 Smart Rate PoE+ 1-slot Switch (JL323A)
SPECIFICATIONS | |
Aruba 2930M 40G 8 HPE Smart Rate PoE+ 1-slot Switch (JL323A) | |
I/O ports and slots | |
44 Autosensing 10/100/1000
ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T, IEEE 802.3at PoE+); Duplex: 10BASE‑T/100BASE-TX:half or full;1000BASE-T:full only 4 Combo 10/100/1000BASE-T PoE+ or 100/1000Mbps SFP Ports |
|
Additional ports and slots | |
1 Dual Personality (RJ-45 or USB
Micro-B) serial console port 1 USB A port for uploading/ downloading files 1 100BASE-T Out of Band Management Port 1 Uplink Slot 1 Stacking Module Slot 2 Power Supply Slots (power supplies not included) |
|
Physical characteristics | |
Dimensions | 1.73" (Height) x 17.42" (Width) x
12.77" (Depth) (4.39cm x 44.25cm x 32.43cm) |
Weight | 9.81 lbs 4.45 kg |
Memory and processor | |
Dual Core ARM Cortex A9 @ 1016
MHz, 1 GB DDR3 SDRAM; Packet buffer size: 12.38 MB 4.5 MB Ingress/7.785 Egress, 4 GB eMMC |
|
Performance | |
10 Mbps Latency |
< 98.5µs (FIFO 64 byte packets) |
100 Mbps Latency | < 11.8µs (FIFO 64-byte Packets) |
1,000 Mb Latency |
< 3.1µs (FIFO 64-byte packets) |
2.5 Gbps Latency | < 4.2µs (FIFO 64-byte packets) |
5 Gbps Latency | N/A |
10 Gbps Latency | < 3.4µs (FIFO 64-byte packets) |
Throughput | 112 Mpps |
Stacking Performance |
100 Gbps |
Switching capacity | 320 Gbps |
Switching Capacity (Including Stacking) |
420 Gbps |
Routing table size | 2,000 IPv4, 1,000 IPv6 in hardware, 200 OSPF, 256 Static, 10,000 RIP |
MAC address table size | 32,768 entries |
Environment | |
Operating temperature | 32°F to 131°F (0°C to 55°C) up to
5000ft, 32°F to 122°F (0°C to 50°C). Derate -1 degree C for every 1000 ft from 5000 ft to 10000 ft |
Operating relative humidity | 15% to 95% (Non-condensing) 10,000 ft |
Non operating/Storage temperature |
-40°C to +70°Cup to 15000 ft |
Non-operating/Storage relative humidity |
90% at 65C (non-condensing); 15,000 ft |
Acoustic | Sound Power LWaD=4.4 Bel, Sound Pressure LpAm, Bystander = 26.0 dB |
Primary Airflow Direction |
Port to Power |
Electrical characteristics | |
Frequency | 50/60 Hz |
Power efficiency certifications |
|
Maximum heat dissipation | 457 BTU/hr
482 kJ/hr |
Voltage | JL086A PSU:
100-127/200-240 VAC JL087A PSU: 110-127/200-240 VAC |
Current | JL086A PSU (each): 5.3/2.6A
JL087A PSU (each): 9A/4.5A |
Maximum power rating | JL086A PSU (each): 495W
JL087A PSU (each): 855W |
Idle power | 90W |
PoE power | 1440 Watts |
Hibernate Power | 25W |
Notes | Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst case theoretical maximum numbers provide for planning the infrastructure with 100% traffic, all ports plugged in, and all modules populated. |
Safety | |
UL 60950-1: 2nd Edition; UL 62368-1: 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; EN 62368-1: 2nd Edition; IEC 60950- 1:2005 +A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; IEC-62368-1:2nd Edition; EN 60825-1:2014 / IEC 60825-1:2014 Class 1 |
|
Emissions | |
EN 55032:2012/CISPR 32 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438 |
|
Immunity | |
Generic | EN 55024:2010/CISPR 24 |
ESD | IEC 61000-4-2 |
Radiated | IEC 61000-4-3 |
EFT/Burst | IEC 61000-4-4 |
Surge | IEC 61000-4-5 |
Conducted | IEC 61000-4-6 |
Power frequency magnetic field |
IEC 61000-4-8 |
Voltage dips and Interruptions |
IEC 61000-4-11 |
Harmonics | IEC/EN 61000-3-2 |
Flicker | IEC/EN 61000-3-3 |
Management | |
Aruba Central; Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface; Web browser; Configuration menu; SNMP manager; Telnet; RMON1; FTP |